IP1616

TELEX IP Consoles

Telex IP consoles deliver everything for dispatch communications—stability, performance, and world-class dispatch capability. The IP platform makes it simple to install, easy to expand, and flexible enough to use in any dispatch setting.

Registered users may be eligible for additional discounts. Please register to see if you are eligible for a lower price.

Pricing discounts are extended to registered customer, state, local and federal government users. We WANT you to get the best price so indicate your purchaser status during registration.

Telex IP consoles deliver everything for dispatch communications—stability, performance, and world-class dispatch capability. The IP platform makes it simple to install, easy to expand, and flexible enough to use in any dispatch setting.

 

IP-1616 Compact IP Based Console

  • Call history – Up to last 50 incoming calls displayed.
  • Autodial from history list and phone list.
  • Caller ID (Phone, iDEN, MDC, FleetSync, TETRA and 5-tone).
  • NEO-10 Support – Able to control two NEO-10 relays from the console.
  • iDEN Support – Full support of NI-223 features, including ID, go-ahead beeps, busy signal, and manual dial.
  • Scan feature for supported radios.
  • Emergency – Decodes incoming emergency signals from supported ANI formats.
  • Clear/Coded Transmit for EFJ RS5300 mobile radio.
  • Radio Telephony Operation – Allows local console to change channel of the remote radio via POTS line. Also, gives operators the ability to designate certain lines to automatically failover to a standard POTS line if the IP connection fails. Phone line interface- Allows interfacing to a phone line.
  • Telex System Manager (TSM): View, manipulate, and manage multiple Telex device parameters and settings. Easily detect all Telex devices on the network for configuration.
  • 16-channel control
  • Kenwood P25 TK5710/5810 serial control – Supports encode and decode of FleetSync ID and P25 ID, channel change, scan ON/OFF, and monitor. Also capable of direct serial control of Kenwood 80, 90, and 150 Series radios.
  • Generate FleetSync MSK signal at the IP223 – Does not require specific Kenwood base station.
  • Crosspatching of two to eight lines
  • Communications with crosspatch groups while operating on unused channels
  • Simplex/full-duplex operation (field programmable)
  • Crossmute (Ethernet-based)
  • Parallel console update
  • Instant Call Recorder (IRR)
  • Line select call with alarm
  • Telex System Manager (TSM): easily detects C-6200 device on the network for easy firmware upgrade and configuration.

IP-2002 Telephone Ip Based Console 

  • Call history – Up to last 50 incoming calls displayed.
  • Autodial from history list and phone list.
  • Caller ID (Phone, iDEN, MDC, FleetSync, TETRA and 5-tone).
  • IDEN Support – Full support of NI-223 features, including ID, go-ahead beeps, busy signal and manual dial.
  • Scan feature for supported radios.
  • Emergency – Decodes incoming emergency signals from supported ANI formats.
  • Clear/Coded Transmit for EFJ RS5300 mobile radio.
  • Radio Telephone Operation – Allows local console to change channel of the remote radio via POTS line. Also gives operators the ability to designate certain lines to automatically failover to a standard POTS line if the IP connection fails.
  • Telex System Manager (TSM): View, manipulate and manage multiple Telex device parameters and settings. Easily detect all Telex devices on the network for easy configuration.
  • Kenwood P25 TK5710/5810 serial control – Supports encode and decode of FleetSync ID and P25 ID, channel change, scan ON/OFF, and monitor. Also capable of direct serial control of Kenwood 80, 90, and 150 series radios.
  • Generate FleetSync MSK signal at the IP223 – Does not require specific Kenwood base station.

 

pdf

 

 

Additional information

Features

• C-Soft is available in configurations from 2 to 200 lines.

• User-controlled configurations for any dispatch application.

• Signaling Capabilities: MDC1200 encode and decode, NexEdge, FleetSync encode and decode, DTMF, serial and OTA FleetSync, 5/6 tone – supports emergency, group, individual, and status calls.

• Instant Recall Recorder: Tracks the last ten minutes of both select and unselect speaker audio.

• Buttons can be set up to start playback at various points in the buffer or played call-by-call from the call buffer.

• Information Windows: Per-Line Call History, Active Emergency, Emergency History, Manual Call List, Status Windows, and Call Queue.

• Per Line Call Playback: The option expands capabilities to one hour to recording up to 100 lines. 1 line included with each C-Soft license.

• Intercom Capabilities: Intercom communications between dispatch positions can be set up on all consoles on the system.

• DTMF Keys: A full 16-key keyboard is supported.

• Paging: Multiple paging formats are built into the C-Soft console software.

• Quickcall II in both the 100 and 1000 group formats, as well as DTMF, Knox Paging tone, and 5/6 tone paging.

• Manual frequency entry mode is also supported.

• Alert Tones: Three alert-tone types are supported, including steady tone, pulsed tone, and high-low warble.

• All frequencies and durations are programmable.

• Pre-Recorded Announcements: Transmit pre-recorded .wav files to selected lines with a single button press.

• Programmed Group & Mute Buttons: For both Group and Mute functions, lines can be selectively included within these programmed buttons, allowing for instant access to particular lines of interest.

• Status Indicators: 24-hour clock, VU Meter, PTT Indication, and Instant Recall Recorder progress are displayed on the upper status bar.

• Flexible Audio Interface Options: Using Telex’s ADHB-4 and the RHB, C-Soft can interface with all common dispatch communication audio sources, including headsets, desktop microphones, external speakers (up to six), and footswitches.

• SIP Telephony: Crosspatch, DTMF hold, call history, phone directory, stun, and proxy server.

• Provides audio adjustment with silence detection and jitter buffering.

• Able to specify IP interface for SIP connections.

• 2 lines included with each C-Soft license, expandable to 6 or 12 lines.

• Multiple Vocoders: Per-line vocoder-type ability to select lower bandwidth vocoder.

• Special Interfaces: MOTOTRBOTM Systems with Mapping, Motorola Smartnet/Smartzone, Kenwood NEXEDGE, Icom IDAS, TETRA (Hytera/PowerTrunk/Sepura), iDEN, P25 DFSI, and DMR

• Special Interface Radio Commands: Channel/TG change, Group/Private Call, Encryption, GPS, Monitor, Call Alert, Radio Check/Enable/Disable, Remote Monitor, Text Messaging, Status Request, Scan and Talk-Around

• Commands vary based on Interface type, please see manual for more details.